Cemher Polyshield

Rated 4.5/5 by hundreds of happy customers

£100.00 (incl. VAT)

Size

Polyshield® is a two-component polyaspartic self-levelling aliphatic acrylic polyurethane resin sealer. It has a high viscosity and a high solids content and therefore provides extreme filling and waterproofing. A thick, impenetrable film is achieved in just one coat. Extremely good chemical resistance, with high impact and abrasion resistance.

High impact and abrasion resistance
Thick, impenetrable film in just one coat
Ideal for high traffic floors

Uses / Areas of Application

Polyshield® is most suited for application on high traffic internal floors and internal commercial settings where regular, constant use and regular cleaning is anticipated.

It adds an incredibly strong surface layer across the area, which provides unprecedented impact and abrasion resistance.

Its formulation with a high solids content (80%) gives it extraordinary performance. It also has an incredibly high resistance to water penetration.

Polyshield® is a clear coat, fast-setting, self-levelling resin, which is only recommended for use by trade professionals with experience of working with such products.

Polyshield is applied directly to the Microcement surface without HydroPrimer, in some instances, it can intensify the colour of the microcement and textures in the surface.

Characteristics / Benefits

Fast drying (2-3h approximately at 23°C)
High solids content
Total pore sealing
Very good resistance to water and chemicals
High hardness
High adherence to the surface
Application with squeegee trowel
Intensifies the colour & texture of the support

Add the Polyshield and the Polyshield Comp B in a mixing jug and stir gently with a mechanical paint mixer on a low speed for 3 full minutes. It will appear thick at first but will loosen as you mix it.

To get the full benefit from the sealer, you must use the full consumption across the area.

Using a Squeegee Trowel on a Pole will help you to apply the Polyshield across bigger floor areas quickly and effectively.

Pour the Polyshield from the starting point across the width of the room. Using light pressure on the trowel, spread the Polyshield evenly across the floor, working from one side of the room to the other, taking care to get full coverage everywhere.

Aim for even coverage without ridges or thick spots.

Polyshield should be dry in around 12 hours but may vary depending on temperature and humidity. The finish is very glossy, so you’ll need to add a coat of AquaMax Pro for Floors over it to achieve the desired finish.

	Internal Floors & Worktops
Process	1 x Coat of Polyshield
Mix Ratio	1l Polyshield : 400ml Polyshield Comp B 4l Polyshield : 1.6l Polyshield Comp B
Standard Consumption	1l Polyshield + 400ml Polyshield Comp B per 4m2
Estimated Drying Time	Minimum 12 hours between coats 48 hours before light foot traffic
Tools Required	Mechanical Mixer Clean Mixing Bucket Squeegee Trowel
Safety & PPE	Chemical-resistant gloves — essential, dispose of after use Safety goggles Respirator suitable for organic solvents — essential Ensure excellent ventilation — vapours are heavier than air Keep away from all ignition sources Avoid skin contact — may cause skin sensitisation

Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order. Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

UK mainland: 1 – 3 working days
Isle of Wight: 2 – 4 days
Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

Product Description
Uses / Areas of Application

Polyshield® is most suited for application on high traffic internal floors and internal commercial settings where regular, constant use and regular cleaning is anticipated.

It adds an incredibly strong surface layer across the area, which provides unprecedented impact and abrasion resistance.

Its formulation with a high solids content (80%) gives it extraordinary performance. It also has an incredibly high resistance to water penetration.

Polyshield® is a clear coat, fast-setting, self-levelling resin, which is only recommended for use by trade professionals with experience of working with such products.

Polyshield is applied directly to the Microcement surface without HydroPrimer, in some instances, it can intensify the colour of the microcement and textures in the surface.

Characteristics / Benefits
- Fast drying (2-3h approximately at 23°C)
- High solids content
- Total pore sealing
- Very good resistance to water and chemicals
- High hardness
- High adherence to the surface
- Application with squeegee trowel
- Intensifies the colour & texture of the support
Installation

Add the Polyshield and the Polyshield Comp B in a mixing jug and stir gently with a mechanical paint mixer on a low speed for 3 full minutes. It will appear thick at first but will loosen as you mix it.

To get the full benefit from the sealer, you must use the full consumption across the area.

Using a Squeegee Trowel on a Pole will help you to apply the Polyshield across bigger floor areas quickly and effectively.

Pour the Polyshield from the starting point across the width of the room. Using light pressure on the trowel, spread the Polyshield evenly across the floor, working from one side of the room to the other, taking care to get full coverage everywhere.

Aim for even coverage without ridges or thick spots.

Polyshield should be dry in around 12 hours but may vary depending on temperature and humidity. The finish is very glossy, so you’ll need to add a coat of AquaMax Pro for Floors over it to achieve the desired finish.

https://youtu.be/NiW1F1A3iPQ

Specification

	Internal Floors & Worktops
Process	Internal Floors & Worktops: 1 x Coat of Polyshield
Mix Ratio	Internal Floors & Worktops: 1l Polyshield : 400ml Polyshield Comp B 4l Polyshield : 1.6l Polyshield Comp B
Standard Consumption	Internal Floors & Worktops: 1l Polyshield + 400ml Polyshield Comp B per 4m2
Estimated Drying Time	Internal Floors & Worktops: Minimum 12 hours between coats 48 hours before light foot traffic
Tools Required	Internal Floors & Worktops: Mechanical Mixer Clean Mixing Bucket Squeegee Trowel
Safety & PPE	Internal Floors & Worktops: Chemical-resistant gloves — essential, dispose of after use Safety goggles Respirator suitable for organic solvents — essential Ensure excellent ventilation — vapours are heavier than air Keep away from all ignition sources Avoid skin contact — may cause skin sensitisation

Shipping
Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order. Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:
- UK mainland: 1 – 3 working days
- Isle of Wight: 2 – 4 days
- Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days
Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

50+ Colours, Effects and Finishes

Free Online Microcement Training Course

UK Stock For Fast Delivery

What our Customers Say

great team and excellent products

Have been using Relentless for a few years now, great team and excellent products.

Customers are thrilled

Used Relentless again on another project; very happy with the quality and service as usual! Customers are thrilled with their new wet room so thumbs up all round!

Great products, great training

Great products, great training videos and fast delivery! Fantastic company.

Happy clients. Thanks.

This was new to me and my first foray into microcement. The buying process was straight forward and helpful and the training video/ description on how to prep and apply was very good and allowed me to successfully do the job. Happy clients. Thanks.

Very good technical advice

Is a very good stuff Good supplier

Very good technical advice

Very good technical advice and products were sent straight away highly reccomemd 🤩

Paul R

I’ve been using relentless microcement for quite a few years now, great product range. They have pretty much everything you need for your projects whether it be inside, outside, worktops, bathrooms, and flooring. Richie and sally are easy to talk to and they know everything you need to know about their products. 5 stars everytime

We’re over the moon

Amazing product and service as always from Relentless. Just finished my living room floor and walls and we’re over the moon with the finish. Thanks Relentless 👍

There’s a product for every need!

I’ve done quite a few jobs now over the past four years and can’t fault it. There’s a product for every need! It’s easy to apply once you get the hang of it and anything that you’re not sure about relentless are there to advise you. The only problem you’ll have is deciding which colour to choose !

Products are great

Products are great and we have purchased them several times, but the highlight is costumer servise. It’s rare to have prompt and professional costumer service – this is the main reason why we are choosing this company. We had issues once with the delivery and Sally handled it in the best way possible. Overall delivery is actually super quick.

Cemher Polyshield

Uses / Areas of Application

Characteristics / Benefits

Speedy Deliveries

Collect in Leeds

Product Description

Uses / Areas of Application

Characteristics / Benefits

Installation

Specification

Shipping

Speedy Deliveries

Collect in Leeds

Featured In

What our Customers Say

Customers Also Bought

Cemher AquaMax Pro for Floors

Rubber Squeegee Trowel

Microcement Sanding Discs