Cemher AquaMax Pro for Floors

Rated 4.5/5 by hundreds of happy customers

£82.00 (incl. VAT)

Finish

Size

Aquamax® Pro for Floors is a two-component water-based polyurethane sealer with excellent hardness and chemical resistance. Developed with Cemher’s innovative WMA (Without Matting Agents) technology in satin and matt finishes to provide a superior aesthetic without compromising on performance.

Suitable for use in high traffic areas
Excellent chemical and stain resistance
Available in Matt, Satin or Gloss

Uses / Areas of Application

Two-component polyurethane for protection, sealing and decorative finishing, formulated with water-based hydroxylated polycarbonate resins that give it extraordinary performance.

It is highly transparent and has no yellowing. The material of the treated substrate gets

waterproofed, while maintaining its breathability to water vapor. As it does not contain matting agents, it is highly resistant to wear and tear, dirt and chemical products.

Ideal for application on Cemher microcement systems, it presents a very natural finish, whilst protecting the microcement from wear.

Characteristics / Benefits

Water-based
Excellent resistance to chemical agents, water and alkalis
50% solids
Solvent free
Odourless
Zero VOC, environmentally friendly
WMA Technology (without matting agents)
No white marks caused by matting agents
Excellent resistance to abrasion and scratches
No yellowing under the action of sunlight
Compatible with a wide range of substrates
Breathable
Easy to apply

Mix the AquaMax Pro Comp A with the AquaMax Pro for Floors Comp B in a mixing jug and stir gently with a paint stirrer for at least a minute. Do not whisk as it will put too much air in the mix. Leave to rest for a couple of minutes before applying.

Only mix enough for 1 coat at a time, as the mixture will only last for 45 minutes once combined.

Use a medium pile roller to apply the AquaMax Pro evenly across the entire area.

Starting in one corner, apply the AquaMax Pro in an area and then go back over it very gently with the roller to remove any excess product, air bubbles and lines.

Work quickly & randomly keeping the edge wet.

Ensure you cover the full area with AquaMax Pro and use the full amount provided.

Leave the 1st coat to dry for a minimum of 12 hours before applying the 2nd coat.

After 24 hours, you can complete the 2nd coat of AquaMax Pro. Check the surface for bits of dust and debris that may have settled in it. You can use a 400 grit sanding disc or razor scraper to remove these before applying your final coat.

Mix and apply the 2nd coat in exactly the same way that you did the 1st one.

Leave for at least 48 hours. Light use only for the first 14 days.

	Application on Microne, Microdur Plus & Hydroprimer	Application on Polyshield & Micropool
Process	2 x Coats AquaMax Pro for Floors	1 x Coat of AquaMax Pro for Floors
Mix Ratio	5 AquaMax Pro Comp A : 1 AquaMax Pro Comp B 1l AquaMax Pro Comp A : 200ml AquaMax Pro Comp B	5 AquaMax Pro Comp A : 1 AquaMax Pro Comp B 1l AquaMax Pro Comp A : 200ml AquaMax Pro Comp B
Standard Consumption	1l per 10m2	500ml per 10m2
Estimated Drying Time	Minimum 12 hours between coats 48 hours before light foot traffic	Minimum 12 hours between coats 48 hours before light foot traffic
Tools Required	Medium Microfibre Roller Roller Tray	Medium Microfibre Roller Roller Tray
Safety & PPE	Nitrile gloves Eye protection Ensure adequate ventilation throughout	Nitrile gloves Eye protection Ensure adequate ventilation throughout

Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order. Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

UK mainland: 1 – 3 working days
Isle of Wight: 2 – 4 days
Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

Product Description
Uses / Areas of Application

Two-component polyurethane for protection, sealing and decorative finishing, formulated with water-based hydroxylated polycarbonate resins that give it extraordinary performance.

It is highly transparent and has no yellowing. The material of the treated substrate gets

waterproofed, while maintaining its breathability to water vapor. As it does not contain matting agents, it is highly resistant to wear and tear, dirt and chemical products.

Ideal for application on Cemher microcement systems, it presents a very natural finish, whilst protecting the microcement from wear.

Characteristics / Benefits
- Water-based
- Excellent resistance to chemical agents, water and alkalis
- 50% solids
- Solvent free
- Odourless
- Zero VOC, environmentally friendly
- WMA Technology (without matting agents)
- No white marks caused by matting agents
- Excellent resistance to abrasion and scratches
- No yellowing under the action of sunlight
- Compatible with a wide range of substrates
- Breathable
- Easy to apply
Installation

Mix the AquaMax Pro Comp A with the AquaMax Pro for Floors Comp B in a mixing jug and stir gently with a paint stirrer for at least a minute. Do not whisk as it will put too much air in the mix. Leave to rest for a couple of minutes before applying.

Only mix enough for 1 coat at a time, as the mixture will only last for 45 minutes once combined.

Use a medium pile roller to apply the AquaMax Pro evenly across the entire area.

Starting in one corner, apply the AquaMax Pro in an area and then go back over it very gently with the roller to remove any excess product, air bubbles and lines.

Work quickly & randomly keeping the edge wet.

Ensure you cover the full area with AquaMax Pro and use the full amount provided.

Leave the 1st coat to dry for a minimum of 12 hours before applying the 2nd coat.

After 24 hours, you can complete the 2nd coat of AquaMax Pro. Check the surface for bits of dust and debris that may have settled in it. You can use a 400 grit sanding disc or razor scraper to remove these before applying your final coat.

Mix and apply the 2nd coat in exactly the same way that you did the 1st one.

Leave for at least 48 hours. Light use only for the first 14 days.

https://youtu.be/lxRpkpLcBgo

Specification

	Application on Microne, Microdur Plus & Hydroprimer	Application on Polyshield & Micropool
Process	Application on Microne, Microdur Plus & Hydroprimer: 2 x Coats AquaMax Pro for Floors	Application on Polyshield & Micropool: 1 x Coat of AquaMax Pro for Floors
Mix Ratio	Application on Microne, Microdur Plus & Hydroprimer: 5 AquaMax Pro Comp A : 1 AquaMax Pro Comp B 1l AquaMax Pro Comp A : 200ml AquaMax Pro Comp B	Application on Polyshield & Micropool: 5 AquaMax Pro Comp A : 1 AquaMax Pro Comp B 1l AquaMax Pro Comp A : 200ml AquaMax Pro Comp B
Standard Consumption	Application on Microne, Microdur Plus & Hydroprimer: 1l per 10m2	Application on Polyshield & Micropool: 500ml per 10m2
Estimated Drying Time	Application on Microne, Microdur Plus & Hydroprimer: Minimum 12 hours between coats 48 hours before light foot traffic	Application on Polyshield & Micropool: Minimum 12 hours between coats 48 hours before light foot traffic
Tools Required	Application on Microne, Microdur Plus & Hydroprimer: Medium Microfibre Roller Roller Tray	Application on Polyshield & Micropool: Medium Microfibre Roller Roller Tray
Safety & PPE	Application on Microne, Microdur Plus & Hydroprimer: Nitrile gloves Eye protection Ensure adequate ventilation throughout	Application on Polyshield & Micropool: Nitrile gloves Eye protection Ensure adequate ventilation throughout

Shipping
Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order. Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:
- UK mainland: 1 – 3 working days
- Isle of Wight: 2 – 4 days
- Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days
Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

50+ Colours, Effects and Finishes

Free Online Microcement Training Course

UK Stock For Fast Delivery

What our Customers Say

great team and excellent products

Have been using Relentless for a few years now, great team and excellent products.

Customers are thrilled

Used Relentless again on another project; very happy with the quality and service as usual! Customers are thrilled with their new wet room so thumbs up all round!

Great products, great training

Great products, great training videos and fast delivery! Fantastic company.

Happy clients. Thanks.

This was new to me and my first foray into microcement. The buying process was straight forward and helpful and the training video/ description on how to prep and apply was very good and allowed me to successfully do the job. Happy clients. Thanks.

Very good technical advice

Is a very good stuff Good supplier

Very good technical advice

Very good technical advice and products were sent straight away highly reccomemd 🤩

Paul R

I’ve been using relentless microcement for quite a few years now, great product range. They have pretty much everything you need for your projects whether it be inside, outside, worktops, bathrooms, and flooring. Richie and sally are easy to talk to and they know everything you need to know about their products. 5 stars everytime

We’re over the moon

Amazing product and service as always from Relentless. Just finished my living room floor and walls and we’re over the moon with the finish. Thanks Relentless 👍

There’s a product for every need!

I’ve done quite a few jobs now over the past four years and can’t fault it. There’s a product for every need! It’s easy to apply once you get the hang of it and anything that you’re not sure about relentless are there to advise you. The only problem you’ll have is deciding which colour to choose !

Products are great

Products are great and we have purchased them several times, but the highlight is costumer servise. It’s rare to have prompt and professional costumer service – this is the main reason why we are choosing this company. We had issues once with the delivery and Sally handled it in the best way possible. Overall delivery is actually super quick.