0333 577 2611
FREE colour swatch book for every customer Use code SWTCHBK at checkout

Add Colour Toner

This product usually requires a colour toner. Would you like to add colour?

Colour Toner for Microne Coarse

£10.00 (incl. VAT)

 Choose Colour

Cemher Microne Coarse Sparkle Effect

|

Rated 4.5/5 by hundreds of happy customers

£104.00 (incl. VAT)
  • Size: 10kg + 3kg

Glass crystals are added to Microne® Coarse to bring a little sparkle to the finish with even distribution. The glass crystals are made up of irregular shaped black, grey, brown and clear glass of 1-3mm. Microne® is an incredibly versatile, modern take on microcement.  It’s pre-mixed and ready to use, with an unlimited working time. It’s completely waterproof, even before sealers are applied.  This makes it the ideal choice for bathrooms and wet rooms.

  • 100% Waterproof microcement, ideal for bathrooms & wet rooms
  • Pre-mixed, ready to use with unlimited working time
  • Contains glass crystals for a sparkle effect

Contains:

Cemher Microne Coarse
1 × Cemher Microne Coarse
Cemher Glass Crystals 3kg
1 × Cemher Glass Crystals 3kg

Uses / Areas of Application

Microne Coarse Sparkle Effect is a microcement top coat that is usually applied in 1 coat on top of Microne Base to give a speckled glass effect. It is usually necessary to apply a thin grout coat of Microne Medium without cystals on top to even out the surface.

The new formula of the Microne® microcement line, based on polyurethane, is characterised by being the most versatile line, as it consists of two possible products in one.

Microne® can be applied in a single-component, as ‘ready-to-use’ microcement with a hardness of 27 MPa. Choose Microne Plus ‘dual component’ microcement with the addition of Microne Plus Comp B (Catalyst), which increases its hardness to 50 MPa.

Microne® ‘ready to use’ has an incredible elasticity, which makes it forgiving on small movements in the substrate.

Unlike may microcements on the market, Microne is completely waterproof, even before sealers. This is essential for wet environments like showers, wet rooms and bathrooms. Where it does the jobs of a tanking product and a decorative surface finish in one.

Microne® is pre-mixed with the colour of your choice, according to strict colour quality control systems in our warehouse in Leeds.

Thanks to its high impermeability it is not necessary to apply pre-sealers, two coats of AquaMax is enough to avoid dust and stains.  Which, due to the low absorption rate of Microne®, is extremely easy to apply.

Microne® facilitates one of the quickest microcement installation times known at 3 – 4 days.

Microne is the ideal choice for:

  • Tanking and decorating shower enclosures, shower trays, wet rooms and bathrooms
  • Highly decorative continuous coatings for interior floors, walls and ceilings
  • Coating of interior and exterior furniture, shelves, kitchen countertops, counters
  • Not suitable for swimming pools or continuously immersed surfaces
  • Covering of old ceramic tile surfaces

Characteristics / Benefits

  • 100% waterproof microcement
  • Pre-mixed for easy installation, excellent workability
  • Can be applied on almost any type of surface: plaster, plasterboard, cement board, Aqua4ma panels, concrete, self-leveller, composite timber boards, tiles, metals
  • Non-yellowing
  • Applicable in interiors and exteriors
  • Must be applied thinly, no thicker than the grain

Mix the Microne thoroughly to ensure an even distribution of colour.

Then add 3kg Glass Crystals & mix gently on a slow speed.  Take care not to mix too aggressively as this could cause the Crystals to break down.

Use a Microcement Trowel and hold it quite flat to the surface. Don’t put as much pressure on as you did with the base coats to avoid the crystals leaving drag marks across the surface.

Gently spread the crystals across the area so that you have full coverage and drag marks are minimised. After 20 minutes to 1 hour, use a hard foam float, in circular motions to remove imperfections and bring the glass crystals to the surface.

Leave the Microcement to dry.  With crystals in the mix, this often takes more time than standard Microcement.  Allow up to 12 hours.  Drying times do vary depending on temperature and ventilation.

Applying 2nd Coat Microne Medium without glass crystals.

Use this coat to glide over the previous one, filling in any imperfections as you go. Because there’s no crystals in it, you go can a lot thinner with this coat.

The microcement needs to be fully dry before sealer is applied. If not the microcement will not reach full hardness and could de-laminate.

Moisture content should be less than 5% before sealer is applied.

Leave to dry for at least 12 hours. Timings are for guidance only, your microcement may take longer to dry depending on temperature and humidity.

Sand with 40 grit sand paper to reveal the crystals in the microcement.  This will be a lot easier with an orbital sander than by hand. Once you have revealed a good, even spread of crystals, move onto the 80 grit sand paper and give the whole area another sand. Finally, use a 120 grit sand paper to tidy up your wark and close in the pours.

Vacuum the surface to remove all dust and debris. Do not wet the microcement.

 
Process Apply 1 Coat Microne Coarse with Glass Crystals, followed by a coat of Microne Medium without Crystals
Mix Ratio 10kg Microne Coarse : 3kg Glass Crystals
Standard Consumption Microne Coarse: 10kg per 10m2
Microne Medium: 5kg per 10m2
Estimated Drying Time Between Coats:
Minimum 3 hours
No Maximum

Before Sealers:
Minimum 24 hours
No Maximum
Tools Required Microcement Trowel
Microcement Mixer
Silicone Carbide Sanding Discs
Clean Mixing Bucket
Weighing Scales
Measuring Jug
PPE

Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order.  Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

  • UK mainland: 1 – 3 working days
  • Isle of Wight: 2 – 4 days
  • Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

  • Product Description

    Uses / Areas of Application

    Microne Coarse Sparkle Effect is a microcement top coat that is usually applied in 1 coat on top of Microne Base to give a speckled glass effect. It is usually necessary to apply a thin grout coat of Microne Medium without cystals on top to even out the surface.

    The new formula of the Microne® microcement line, based on polyurethane, is characterised by being the most versatile line, as it consists of two possible products in one.

    Microne® can be applied in a single-component, as ‘ready-to-use’ microcement with a hardness of 27 MPa. Choose Microne Plus ‘dual component’ microcement with the addition of Microne Plus Comp B (Catalyst), which increases its hardness to 50 MPa.

    Microne® ‘ready to use’ has an incredible elasticity, which makes it forgiving on small movements in the substrate.

    Unlike may microcements on the market, Microne is completely waterproof, even before sealers. This is essential for wet environments like showers, wet rooms and bathrooms. Where it does the jobs of a tanking product and a decorative surface finish in one.

    Microne® is pre-mixed with the colour of your choice, according to strict colour quality control systems in our warehouse in Leeds.

    Thanks to its high impermeability it is not necessary to apply pre-sealers, two coats of AquaMax is enough to avoid dust and stains.  Which, due to the low absorption rate of Microne®, is extremely easy to apply.

    Microne® facilitates one of the quickest microcement installation times known at 3 – 4 days.

    Microne is the ideal choice for:

    • Tanking and decorating shower enclosures, shower trays, wet rooms and bathrooms
    • Highly decorative continuous coatings for interior floors, walls and ceilings
    • Coating of interior and exterior furniture, shelves, kitchen countertops, counters
    • Not suitable for swimming pools or continuously immersed surfaces
    • Covering of old ceramic tile surfaces

    Characteristics / Benefits

    • 100% waterproof microcement
    • Pre-mixed for easy installation, excellent workability
    • Can be applied on almost any type of surface: plaster, plasterboard, cement board, Aqua4ma panels, concrete, self-leveller, composite timber boards, tiles, metals
    • Non-yellowing
    • Applicable in interiors and exteriors
    • Must be applied thinly, no thicker than the grain

  • Installation

    Mix the Microne thoroughly to ensure an even distribution of colour.

    Then add 3kg Glass Crystals & mix gently on a slow speed.  Take care not to mix too aggressively as this could cause the Crystals to break down.

    Use a Microcement Trowel and hold it quite flat to the surface. Don’t put as much pressure on as you did with the base coats to avoid the crystals leaving drag marks across the surface.

    Gently spread the crystals across the area so that you have full coverage and drag marks are minimised. After 20 minutes to 1 hour, use a hard foam float, in circular motions to remove imperfections and bring the glass crystals to the surface.

    Leave the Microcement to dry.  With crystals in the mix, this often takes more time than standard Microcement.  Allow up to 12 hours.  Drying times do vary depending on temperature and ventilation.

    Applying 2nd Coat Microne Medium without glass crystals.

    Use this coat to glide over the previous one, filling in any imperfections as you go. Because there’s no crystals in it, you go can a lot thinner with this coat.

    The microcement needs to be fully dry before sealer is applied. If not the microcement will not reach full hardness and could de-laminate.

    Moisture content should be less than 5% before sealer is applied.

    Leave to dry for at least 12 hours. Timings are for guidance only, your microcement may take longer to dry depending on temperature and humidity.

    Sand with 40 grit sand paper to reveal the crystals in the microcement.  This will be a lot easier with an orbital sander than by hand. Once you have revealed a good, even spread of crystals, move onto the 80 grit sand paper and give the whole area another sand. Finally, use a 120 grit sand paper to tidy up your wark and close in the pours.

    Vacuum the surface to remove all dust and debris. Do not wet the microcement.

    https://youtu.be/fk8i-TcYPaQ?si=-9WeHvdhC3ykmFgz

  • Specification

     
    Process Apply 1 Coat Microne Coarse with Glass Crystals, followed by a coat of Microne Medium without Crystals
    Mix Ratio 10kg Microne Coarse : 3kg Glass Crystals
    Standard Consumption Microne Coarse: 10kg per 10m2
    Microne Medium: 5kg per 10m2
    Estimated Drying Time Between Coats:
    Minimum 3 hours
    No Maximum

    Before Sealers:
    Minimum 24 hours
    No Maximum
    Tools Required Microcement Trowel
    Microcement Mixer
    Silicone Carbide Sanding Discs
    Clean Mixing Bucket
    Weighing Scales
    Measuring Jug
    PPE

  • Shipping

    Speedy Deliveries

    The Relentless team complete all orders by hand and mix all colours to order.  Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

    • UK mainland: 1 – 3 working days
    • Isle of Wight: 2 – 4 days
    • Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

    Collect in Leeds

    If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

    You can view our delivery policy for more information on deliveries and collections.

50+ Colours, Effects and Finishes

Free Online Microcement Training Course

UK Stock For Fast Delivery

Featured In

What our Customers Say

great team and excellent products

Have been using Relentless for a few years now, great team and excellent products.

Customers are thrilled

Used Relentless again on another project; very happy with the quality and service as usual! Customers are thrilled with their new wet room so thumbs up all round!

Great products, great training

Great products, great training videos and fast delivery! Fantastic company.

Happy clients. Thanks.

This was new to me and my first foray into microcement. The buying process was straight forward and helpful and the training video/ description on how to prep and apply was very good and allowed me to successfully do the job. Happy clients. Thanks.

Very good technical advice

Is a very good stuff Good supplier

Very good technical advice

Very good technical advice and products were sent straight away highly reccomemd 🤩

Paul R

I’ve been using relentless microcement for quite a few years now, great product range. They have pretty much everything you need for your projects whether it be inside, outside, worktops, bathrooms, and flooring. Richie and sally are easy to talk to and they know everything you need to know about their products. 5 stars everytime

We’re over the moon

Amazing product and service as always from Relentless. Just finished my living room floor and walls and we’re over the moon with the finish. Thanks Relentless 👍

There’s a product for every need!

I’ve done quite a few jobs now over the past four years and can’t fault it. There’s a product for every need! It’s easy to apply once you get the hang of it and anything that you’re not sure about relentless are there to advise you. The only problem you’ll have is deciding which colour to choose !

Products are great

Products are great and we have purchased them several times, but the highlight is costumer servise. It’s rare to have prompt and professional costumer service – this is the main reason why we are choosing this company. We had issues once with the delivery and Sally handled it in the best way possible. Overall delivery is actually super quick.

Customers Also Bought

Cemher Microne Base

£77.00 (incl. VAT)

 View Product

Cemher AquaMax Pro for Floors

Price range: £70.00 through £245.00 (incl. VAT)

 View Product

Cemher Bi-Flex Steel Trowel

£35.00 (incl. VAT)

 View Product

Frequently Asked Questions