Cemher Microne Medium Continuous in Harewood 059

Rated 4.5/5 by hundreds of happy customers

(incl. VAT)

Size: 10kg

Exclusive available in our factory outlet sale, this Microne Medium Continuous® has been premixed with mixed with Harewood 059.

100% Waterproof microcement, ideal for bathrooms & wet rooms
Pre-mixed, ready to use with unlimited working time
Continuous effect for smooth, uniform finish with gentle visual texturing

Uses / Areas of Application

The new formula of the Microne® microcement line, based on polyurethane, is characterised by being the most versatile line, as it consists of two possible products in one.

Microne® can be applied in a single-component, as ‘ready-to-use’ microcement with a hardness of 27 MPa. Choose Microne Plus ‘dual component’ microcement with the addition of Microne Plus Comp B (Catalyst), which increases its hardness to 50 MPa.

Microne® ‘ready to use’ has an incredible elasticity, which makes it forgiving on small movements in the substrate.

Unlike may microcements on the market, Microne is completely waterproof, even before sealers. This is essential for wet environments like showers, wet rooms and bathrooms. Where it does the jobs of a tanking product and a decorative surface finish in one.

Microne® is pre-mixed with the colour of your choice, according to strict colour quality control systems in our warehouse in Leeds.

Thanks to its high impermeability it is not necessary to apply pre-sealers, two coats of AquaMax is enough to avoid dust and stains. Which, due to the low absorption rate of Microne®, is extremely easy to apply.

Microne® facilitates one of the quickest microcement installation times known at 3 – 4 days.

Microne is the ideal choice for:

Tanking and decorating shower enclosures, shower trays, wet rooms and bathrooms
Highly decorative continuous coatings for interior floors, walls and ceilings
Coating of interior and exterior furniture, shelves, kitchen countertops, counters
Not suitable for swimming pools or continuously immersed surfaces
Covering of old ceramic tile surfaces

Characteristics / Benefits

100% waterproof microcement
Pre-mixed for easy installation, excellent workability
Can be applied on almost any type of surface: plaster, plasterboard, cement board, Aqua4ma panels, concrete, self-leveller, composite timber boards, tiles, metals
Non-yellowing
Applicable in interiors and exteriors
Must be applied thinly, no thicker than the grain

Microne® is pre-mixed in the tub, all you need to do is give it a mix before you start to loosen it and make sure the colour (if included) is evenly distributed.

To do this, mix thoroughly with a microcement mixer head attachment on a cordless drill. If it still feels stiff, you can add up to 10% water to loosen & mix further. That’s a maximum of 1l per 10kg.

Let the mixture rest for a few minutes before applying.

It’s important that you go as thin as the grain with Microne Medium – which you’ll see is very thin indeed.

Using a Microcement Trowel, work your way out from one corner creating a random edge pattern. Keep trowel movements small and random, avoid long sweeping arches – as these will show through to your final finish.

Use the grain in the microcement as your level – if you apply the microcement thicker than the size of the grain, the finish won’t be as strong and will require a lot more sanding. Run the trowel back over each section that you have put down to smooth it out and remove excess product.

Completely cover each surface without stopping. For complete rooms, start with ceilings, then walls from left to right (or right to left) and then the floor.

Run your finger or a corner trowel along internal corners to push the microcement into the corner and then gently trowel away the excess product.

After around 3 hours, you can apply your final coat of Microne in exactly the same way as the previous coats.


Process	Apply 2 Coats Microne Medium
Mix Ratio	Pre-mixed in tub Maximum 10% water to loosen
Standard Consumption	10kg per 10m2
Estimated Drying Time	Between Coats: Minimum 30 minutes No Maximum Before Sealers: Minimum 12 hours No Maximum
Tools Required	Microcement Trowel Microcement Mixer PPE

Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order. Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

UK mainland: 1 – 3 working days
Isle of Wight: 2 – 4 days
Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

Product Description
Uses / Areas of Application

The new formula of the Microne® microcement line, based on polyurethane, is characterised by being the most versatile line, as it consists of two possible products in one.

Microne® can be applied in a single-component, as ‘ready-to-use’ microcement with a hardness of 27 MPa. Choose Microne Plus ‘dual component’ microcement with the addition of Microne Plus Comp B (Catalyst), which increases its hardness to 50 MPa.

Microne® ‘ready to use’ has an incredible elasticity, which makes it forgiving on small movements in the substrate.

Unlike may microcements on the market, Microne is completely waterproof, even before sealers. This is essential for wet environments like showers, wet rooms and bathrooms. Where it does the jobs of a tanking product and a decorative surface finish in one.

Microne® is pre-mixed with the colour of your choice, according to strict colour quality control systems in our warehouse in Leeds.

Thanks to its high impermeability it is not necessary to apply pre-sealers, two coats of AquaMax is enough to avoid dust and stains. Which, due to the low absorption rate of Microne®, is extremely easy to apply.

Microne® facilitates one of the quickest microcement installation times known at 3 – 4 days.

Microne is the ideal choice for:
- Tanking and decorating shower enclosures, shower trays, wet rooms and bathrooms
- Highly decorative continuous coatings for interior floors, walls and ceilings
- Coating of interior and exterior furniture, shelves, kitchen countertops, counters
- Not suitable for swimming pools or continuously immersed surfaces
- Covering of old ceramic tile surfaces
Characteristics / Benefits
- 100% waterproof microcement
- Pre-mixed for easy installation, excellent workability
- Can be applied on almost any type of surface: plaster, plasterboard, cement board, Aqua4ma panels, concrete, self-leveller, composite timber boards, tiles, metals
- Non-yellowing
- Applicable in interiors and exteriors
- Must be applied thinly, no thicker than the grain
Installation

Microne® is pre-mixed in the tub, all you need to do is give it a mix before you start to loosen it and make sure the colour (if included) is evenly distributed.

To do this, mix thoroughly with a microcement mixer head attachment on a cordless drill. If it still feels stiff, you can add up to 10% water to loosen & mix further. That’s a maximum of 1l per 10kg.

Let the mixture rest for a few minutes before applying.

It’s important that you go as thin as the grain with Microne Medium – which you’ll see is very thin indeed.

Using a Microcement Trowel, work your way out from one corner creating a random edge pattern. Keep trowel movements small and random, avoid long sweeping arches – as these will show through to your final finish.

Use the grain in the microcement as your level – if you apply the microcement thicker than the size of the grain, the finish won’t be as strong and will require a lot more sanding. Run the trowel back over each section that you have put down to smooth it out and remove excess product.

Completely cover each surface without stopping. For complete rooms, start with ceilings, then walls from left to right (or right to left) and then the floor.

Run your finger or a corner trowel along internal corners to push the microcement into the corner and then gently trowel away the excess product.

After around 3 hours, you can apply your final coat of Microne in exactly the same way as the previous coats.

https://youtu.be/_jjEKfGnPes

Specification


Process	Apply 2 Coats Microne Medium
Mix Ratio	Pre-mixed in tub Maximum 10% water to loosen
Standard Consumption	10kg per 10m2
Estimated Drying Time	Between Coats: Minimum 30 minutes No Maximum Before Sealers: Minimum 12 hours No Maximum
Tools Required	Microcement Trowel Microcement Mixer PPE

Shipping
Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order. Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:
- UK mainland: 1 – 3 working days
- Isle of Wight: 2 – 4 days
- Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days
Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.