Mixing MicroMetals with Metal Resin
Micrometal is mixed with metal resin to form a metal paste that can be applied to walls by trowel to give them a fine coat of metal on the surface.
Once applied, an accelerator can be used to oxidise the metal surface to create a truly unique patina.
The standard consumption for MicroMetals is 5kg for 10m2, one coat. The pot life of MicroMetals is 1-3 hours, so it’s best to mix larger amounts in batches.
You will need a mixing bucket and microcement mixer.
Mixing the MicroMetal
You will need 5kg of MicroMetal to complete 1 coat over 10m2.
Add the MicroMetal to a mixing bucket and add a small amount of Metal Resin, mix thoroughly, then continue to add small amounts of Metal Resin until it reaches a workable consistency. The amount of Metal Resin required does vary depending on the metal.
These are the approximate mix ratios for each metal:
5kg Iron Powder : 1.25l Metal Resin
5kg Copper Powder : 400ml Metal Resin
5kg Bronze Powder : 400ml Metal Resin
Let the mixture rest for a few minutes before applying. Keep a lid on it between coats. Working time is 1 – 3 hours.
Metal Resin Only
| Oxidising the Metal | Polishing the Metal | |
|---|---|---|
| Process | Oxidising the Metal: Apply 1 coat of liquid metal & oxidise | Polishing the Metal: Apply 2 coat of liquid metal & polish |
| Mix Ratio | Oxidising the Metal: 1kg Metal Powder : 25ml Metal Resin | Polishing the Metal: 1kg Metal Powder : 25ml Metal Resin |
| Standard Consumption | Oxidising the Metal: 5kg per 10m2 | Polishing the Metal: 10kg per 10m2 |
| Estimated Drying Time |
Oxidising the Metal:
Before Accelerator: Minimum 30 minutes No Maximum Before Sealers: Minimum 24 hours No Maximum |
Polishing the Metal:
Between Coats: Minimum 30 minutes No Maximum Before Polishing: Minimum 24 hours No Maximum |
| Tools Required |
Oxidising the Metal:
Microcement Trowel Microcement Mixer PPE |
Polishing the Metal:
Microcement Trowel Microcement Mixer PPE |
Iron Micrometal Only
| Oxidising the Metal | Polishing the Metal | |
|---|---|---|
| Process | Oxidising the Metal: Apply 1 coat of liquid metal & oxidise | Polishing the Metal: Apply 2 coat of liquid metal & polish |
| Mix Ratio | Oxidising the Metal: 1kg Metal Powder : 25ml Metal Resin | Polishing the Metal: 1kg Metal Powder : 25ml Metal Resin |
| Standard Consumption | Oxidising the Metal: 5kg per 10m2 | Polishing the Metal: 10kg per 10m2 |
| Estimated Drying Time |
Oxidising the Metal:
Before Accelerator: Minimum 30 minutes No Maximum Before Sealers: Minimum 24 hours No Maximum |
Polishing the Metal:
Between Coats: Minimum 30 minutes No Maximum Before Polishing: Minimum 24 hours No Maximum |
| Tools Required |
Oxidising the Metal:
Microcement Trowel Microcement Mixer PPE |
Polishing the Metal:
Microcement Trowel Microcement Mixer PPE |
Copper Micrometal Only
| Oxidising the Metal | Polishing the Metal | |
|---|---|---|
| Process | Oxidising the Metal: Apply 1 coat of liquid metal & oxidise | Polishing the Metal: Apply 2 coat of liquid metal & polish |
| Mix Ratio | Oxidising the Metal: 1kg Metal Powder : 25ml Metal Resin | Polishing the Metal: 1kg Metal Powder : 25ml Metal Resin |
| Standard Consumption | Oxidising the Metal: 5kg per 10m2 | Polishing the Metal: 10kg per 10m2 |
| Estimated Drying Time |
Oxidising the Metal:
Before Accelerator: Minimum 30 minutes No Maximum Before Sealers: Minimum 24 hours No Maximum |
Polishing the Metal:
Between Coats: Minimum 30 minutes No Maximum Before Polishing: Minimum 24 hours No Maximum |
| Tools Required |
Oxidising the Metal:
Microcement Trowel Microcement Mixer PPE |
Polishing the Metal:
Microcement Trowel Microcement Mixer PPE |
Bronze Micrometal Only
| Oxidising the Metal | Polishing the Metal | |
|---|---|---|
| Process | Oxidising the Metal: Apply 1 coat of liquid metal & oxidise | Polishing the Metal: Apply 2 coat of liquid metal & polish |
| Mix Ratio | Oxidising the Metal: 1kg Metal Powder : 25ml Metal Resin | Polishing the Metal: 1kg Metal Powder : 25ml Metal Resin |
| Standard Consumption | Oxidising the Metal: 5kg per 10m2 | Polishing the Metal: 10kg per 10m2 |
| Estimated Drying Time |
Oxidising the Metal:
Before Accelerator: Minimum 30 minutes No Maximum Before Sealers: Minimum 24 hours No Maximum |
Polishing the Metal:
Between Coats: Minimum 30 minutes No Maximum Before Polishing: Minimum 24 hours No Maximum |
| Tools Required |
Oxidising the Metal:
Microcement Trowel Microcement Mixer PPE |
Polishing the Metal:
Microcement Trowel Microcement Mixer PPE |