0333 577 2611
FREE colour swatch book for every customer Use code SWTCHBK at checkout

Iron Micrometal + Metal Resin

|

Rated 4.5/5 by hundreds of happy customers

£195.00 (incl. VAT)

Micrometal, fine spherical iron powder is mixed with Cemher Metalresin Comp B to create a liquid metal that can be applied by trowel to create seamless metallic surfaces. Once dry, the metal can be oxidised with Oxhider Activator to create an iron rust effect.

  • Liquid metal applied by trowel for seamless metallic surfaces
  • Oxidise for iron rust effect
  • Apply seamlessly by trowel

Contains:

Iron Micrometal Only
1 × Iron Micrometal Only
Metal Resin Only
2 × Metal Resin Only

Add the MicroMetal to a mixing bucket and add a small amount of Metal Resin, mix thoroughly, then continue to add small amounts of Metal until it reaches a workable consistency.

Let the mixture rest for a few minutes before applying. Keep a lid on it between coats.

Using a Microcement Trowel, work your way out from one corner creating a random edge pattern. Keep trowel movements small and random, avoid long sweeping arches – as these will show through to your final finish.

Use the grain in the liquid metal as your level – if you apply it thicker than the size of the grain, the finish won’t be as strong and will require a lot more sanding. Run the trowel back over each section that you have put down to smooth it out and remove excess product.

Run your finger or a corner trowel along internal corners to push the microcement into the corner and then gently trowel away the excess product.

Oxidising the Metal

Leave the metal for around an hour before applying Oxhider Activator. The metal doesn’t need to be completely dry, in fact if it is still a bit wet it will oxidise quicker. Pour the Oxhider Activator into a spray bottle and spray it directly onto the metal. You may need to dab the excess off with a sponge to stop runs.

Leave to oxidise. Don’t be in a rush, the longer you leave it, the more it will oxidise.

Once it is completely dry, if you would like it to oxidise more, you can sand the surface gently with a 240 grit sand paper and apply more accelerator.

Once you are happy with the level of oxidation, spray the surface with water and dab with a sponge to remove the excess water and rust.

Leave to dry, minimum 24 hours.

  Oxidising the Metal Polishing the Metal
Process Apply 1 coat of liquid metal & oxidise Apply 2 coat of liquid metal & polish
Mix Ratio 5kg Metal Powder : 500ml - 1l Metal Resin 5kg Metal Powder : 500ml - 1l Aquatix
Standard Consumption 5kg per 10m2 10kg per 10m2
Estimated Drying Time Before Accelerator:
Minimum 30 minutes
No Maximum

Before Sealers:
Minimum 24 hours
No Maximum 		Between Coats:
Minimum 30 minutes
No Maximum

Before Polishing:
Minimum 24 hours
No Maximum
Tools Required Microcement Trowel
Microcement Mixer
PPE 		Microcement Trowel
Microcement Mixer
PPE

Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order.  Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

  • UK mainland: 1 – 3 working days
  • Isle of Wight: 2 – 4 days
  • Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

  • Installation

    Add the MicroMetal to a mixing bucket and add a small amount of Metal Resin, mix thoroughly, then continue to add small amounts of Metal until it reaches a workable consistency.

    Let the mixture rest for a few minutes before applying. Keep a lid on it between coats.

    Using a Microcement Trowel, work your way out from one corner creating a random edge pattern. Keep trowel movements small and random, avoid long sweeping arches – as these will show through to your final finish.

    Use the grain in the liquid metal as your level – if you apply it thicker than the size of the grain, the finish won’t be as strong and will require a lot more sanding. Run the trowel back over each section that you have put down to smooth it out and remove excess product.

    Run your finger or a corner trowel along internal corners to push the microcement into the corner and then gently trowel away the excess product.

    Oxidising the Metal

    Leave the metal for around an hour before applying Oxhider Activator. The metal doesn’t need to be completely dry, in fact if it is still a bit wet it will oxidise quicker. Pour the Oxhider Activator into a spray bottle and spray it directly onto the metal. You may need to dab the excess off with a sponge to stop runs.

    Leave to oxidise. Don’t be in a rush, the longer you leave it, the more it will oxidise.

    Once it is completely dry, if you would like it to oxidise more, you can sand the surface gently with a 240 grit sand paper and apply more accelerator.

    Once you are happy with the level of oxidation, spray the surface with water and dab with a sponge to remove the excess water and rust.

    Leave to dry, minimum 24 hours.

    https://youtu.be/oYl5IxEc550

  • Specification

      Oxidising the Metal Polishing the Metal
    Process Oxidising the Metal: Apply 1 coat of liquid metal & oxidise Polishing the Metal: Apply 2 coat of liquid metal & polish
    Mix Ratio Oxidising the Metal: 5kg Metal Powder : 500ml - 1l Metal Resin Polishing the Metal: 5kg Metal Powder : 500ml - 1l Aquatix
    Standard Consumption Oxidising the Metal: 5kg per 10m2 Polishing the Metal: 10kg per 10m2
    Estimated Drying Time Oxidising the Metal: Before Accelerator:
    Minimum 30 minutes
    No Maximum

    Before Sealers:
    Minimum 24 hours
    No Maximum     		Polishing the Metal: Between Coats:
    Minimum 30 minutes
    No Maximum

    Before Polishing:
    Minimum 24 hours
    No Maximum
    Tools Required Oxidising the Metal: Microcement Trowel
    Microcement Mixer
    PPE     		Polishing the Metal: Microcement Trowel
    Microcement Mixer
    PPE

  • Shipping

    Speedy Deliveries

    The Relentless team complete all orders by hand and mix all colours to order.  Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

    • UK mainland: 1 – 3 working days
    • Isle of Wight: 2 – 4 days
    • Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

    Collect in Leeds

    If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

    You can view our delivery policy for more information on deliveries and collections.

50+ Colours, Effects and Finishes

Free Online Microcement Training Course

UK Stock For Fast Delivery

Featured In

What our Customers Say

great team and excellent products

Have been using Relentless for a few years now, great team and excellent products.

Customers are thrilled

Used Relentless again on another project; very happy with the quality and service as usual! Customers are thrilled with their new wet room so thumbs up all round!

Great products, great training

Great products, great training videos and fast delivery! Fantastic company.

Happy clients. Thanks.

This was new to me and my first foray into microcement. The buying process was straight forward and helpful and the training video/ description on how to prep and apply was very good and allowed me to successfully do the job. Happy clients. Thanks.

Very good technical advice

Is a very good stuff Good supplier

Very good technical advice

Very good technical advice and products were sent straight away highly reccomemd 🤩

Paul R

I’ve been using relentless microcement for quite a few years now, great product range. They have pretty much everything you need for your projects whether it be inside, outside, worktops, bathrooms, and flooring. Richie and sally are easy to talk to and they know everything you need to know about their products. 5 stars everytime

We’re over the moon

Amazing product and service as always from Relentless. Just finished my living room floor and walls and we’re over the moon with the finish. Thanks Relentless 👍

There’s a product for every need!

I’ve done quite a few jobs now over the past four years and can’t fault it. There’s a product for every need! It’s easy to apply once you get the hang of it and anything that you’re not sure about relentless are there to advise you. The only problem you’ll have is deciding which colour to choose !

Products are great

Products are great and we have purchased them several times, but the highlight is costumer servise. It’s rare to have prompt and professional costumer service – this is the main reason why we are choosing this company. We had issues once with the delivery and Sally handled it in the best way possible. Overall delivery is actually super quick.

Customers Also Bought

Cemher Oxhider Activator

£55.00 (incl. VAT)

 View Product

Cemher Oxhider Sealer

£45.00 (incl. VAT)

 View Product

Microcement Sanding Discs

£12.00 (incl. VAT)

 View Product