0333 577 2611
FREE colour swatch book for every customer Use code SWTCHBK at checkout

Cemher Primer 100 250ml Sample added to cart

Would you like continue shopping or checkout now?

Checkout Now

Cemher Primer 100 250ml Sample

|

Rated 4.5/5 by hundreds of happy customers

£10.00 (incl. VAT)

Primer 100® is a water-based primer that acts as a bond promoter between surfaces and microcement. It stands out for its high adherence and for maintaining residual tack for 8 hours. It has a high elasticity which gives it excellent resistant to different weather conditions.

  • Bonds microcement to a wide range of surfaces
  • Suitable for absorbent and non-absorbent surfaces
  • High adherence, 8 hours residual tack

Uses / Areas of Application

Apply Primer 100 to the surface prior to the application of microcement to increase adhesion. This is an essential step in the majority of microcement applications.

Primer 100 is suitable for use on absorbent and non-absorbent surfaces.

Compatible surfaces include: plasterboard, plaster, painted walls, cement board, Aqua4ma panels, concrete, screed, self-leveller, mdf, OSB, plywood, tiles, marble, metal or terrazzo.

Primer 100 can be applied over polyurethane sealers should subsequent microcement coats be required.

It is advised to give non-absorbent a sand with a low grit sandpaper in advance to give them a key, prior to application of Primer 100.

Characteristics / Benefits

  • Adhesion promoter for absorbent and non-absorbent
  • Applicable by roller or brush in a single coat
  • Water based, non-flammable
  • The product is supplied ready for use
  • Solvent free
  • Zero VOC, environmentally friendly
  • Easy to apply
  • Compatible with a wide range of products

Before applying Primer 100® the substrate must be properly prepared. It must be dry, clean and free of dust, grease or dirt, with a moisture content of no more than 5%.

Primer 100® is a single component that is ready for use.

Once applied wait a minimum of 30 minutes before applying the first coat of microcement and no more than 8 hours.

It can be applied by spray, brush or roller, covering the surface well.

For highly absorbent surfaces like fresh plaster and freshly laid concrete, apply a diluted coat of Primer 100 (50% Water : 50% Primer 100), followed by a neat coat of Primer 100.

  Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds All Other Surfaces including Non Absorbent Surfaces
Process Diluted Coat followed by Neat Coat Apply Neat Coat Directly
Mix Ratio Diluted Coat:
50% Water / 50% Primer 100

Neat Coat:
Maximum 10% Water 		Maximum 10% Water
Standard Consumption 1l per 4 - 6m2 1l per 8 - 10m2
Estimated Drying Time Diluted Coat:
30 minutes
No Maximum

Neat Coat:
Minimum 30 minutes
Maximum 8 hours 		Minimum 30 minutes
Maximum 8 hours
Tools Required Medium Microfibre Roller
Roller Tray
PPE 		Medium Microfibre Roller
Roller Tray
PPE

Speedy Deliveries

The Relentless team complete all orders by hand and mix all colours to order.  Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

  • UK mainland: 1 – 3 working days
  • Isle of Wight: 2 – 4 days
  • Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

Collect in Leeds

If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

You can view our delivery policy for more information on deliveries and collections.

  • Product Description

    Uses / Areas of Application

    Apply Primer 100 to the surface prior to the application of microcement to increase adhesion. This is an essential step in the majority of microcement applications.

    Primer 100 is suitable for use on absorbent and non-absorbent surfaces.

    Compatible surfaces include: plasterboard, plaster, painted walls, cement board, Aqua4ma panels, concrete, screed, self-leveller, mdf, OSB, plywood, tiles, marble, metal or terrazzo.

    Primer 100 can be applied over polyurethane sealers should subsequent microcement coats be required.

    It is advised to give non-absorbent a sand with a low grit sandpaper in advance to give them a key, prior to application of Primer 100.

    Characteristics / Benefits

    • Adhesion promoter for absorbent and non-absorbent
    • Applicable by roller or brush in a single coat
    • Water based, non-flammable
    • The product is supplied ready for use
    • Solvent free
    • Zero VOC, environmentally friendly
    • Easy to apply
    • Compatible with a wide range of products

  • Installation

    Before applying Primer 100® the substrate must be properly prepared. It must be dry, clean and free of dust, grease or dirt, with a moisture content of no more than 5%.

    Primer 100® is a single component that is ready for use.

    Once applied wait a minimum of 30 minutes before applying the first coat of microcement and no more than 8 hours.

    It can be applied by spray, brush or roller, covering the surface well.

    For highly absorbent surfaces like fresh plaster and freshly laid concrete, apply a diluted coat of Primer 100 (50% Water : 50% Primer 100), followed by a neat coat of Primer 100.

    https://youtu.be/DVkmVpj8wyQ

  • Specification

      Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds All Other Surfaces including Non Absorbent Surfaces
    Process Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds: Diluted Coat followed by Neat Coat All Other Surfaces including Non Absorbent Surfaces: Apply Neat Coat Directly
    Mix Ratio Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds: Diluted Coat:
    50% Water / 50% Primer 100

    Neat Coat:
    Maximum 10% Water     		All Other Surfaces including Non Absorbent Surfaces: Maximum 10% Water
    Standard Consumption Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds: 1l per 4 - 6m2 All Other Surfaces including Non Absorbent Surfaces: 1l per 8 - 10m2
    Estimated Drying Time Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds: Diluted Coat:
    30 minutes
    No Maximum

    Neat Coat:
    Minimum 30 minutes
    Maximum 8 hours     		All Other Surfaces including Non Absorbent Surfaces: Minimum 30 minutes
    Maximum 8 hours
    Tools Required Highly Absorbent Surfaces e.g. Fresh Plaster / Screeds: Medium Microfibre Roller
    Roller Tray
    PPE     		All Other Surfaces including Non Absorbent Surfaces: Medium Microfibre Roller
    Roller Tray
    PPE

  • Shipping

    Speedy Deliveries

    The Relentless team complete all orders by hand and mix all colours to order.  Our highly experienced warehouse team are incredibly quick at this. Plus, we hold a large amount of stock in the UK so that we can get products out to you within the following timelines:

    • UK mainland: 1 – 3 working days
    • Isle of Wight: 2 – 4 days
    • Northern Ireland, Scottish Highlands, Off-Shore Islands: 5 – 7 days

    Collect in Leeds

    If you're local, you’re very welcome to collect your order from our warehouse in Leeds. Once you have placed your order we’ll contact you to let you know when it’s ready for collection.

    You can view our delivery policy for more information on deliveries and collections.

50+ Colours, Effects and Finishes

Free Online Microcement Training Course

UK Stock For Fast Delivery

Featured In

What our Customers Say

great team and excellent products

Have been using Relentless for a few years now, great team and excellent products.

Customers are thrilled

Used Relentless again on another project; very happy with the quality and service as usual! Customers are thrilled with their new wet room so thumbs up all round!

Great products, great training

Great products, great training videos and fast delivery! Fantastic company.

Happy clients. Thanks.

This was new to me and my first foray into microcement. The buying process was straight forward and helpful and the training video/ description on how to prep and apply was very good and allowed me to successfully do the job. Happy clients. Thanks.

Very good technical advice

Is a very good stuff Good supplier

Very good technical advice

Very good technical advice and products were sent straight away highly reccomemd 🤩

Paul R

I’ve been using relentless microcement for quite a few years now, great product range. They have pretty much everything you need for your projects whether it be inside, outside, worktops, bathrooms, and flooring. Richie and sally are easy to talk to and they know everything you need to know about their products. 5 stars everytime

We’re over the moon

Amazing product and service as always from Relentless. Just finished my living room floor and walls and we’re over the moon with the finish. Thanks Relentless 👍

There’s a product for every need!

I’ve done quite a few jobs now over the past four years and can’t fault it. There’s a product for every need! It’s easy to apply once you get the hang of it and anything that you’re not sure about relentless are there to advise you. The only problem you’ll have is deciding which colour to choose !

Products are great

Products are great and we have purchased them several times, but the highlight is costumer servise. It’s rare to have prompt and professional costumer service – this is the main reason why we are choosing this company. We had issues once with the delivery and Sally handled it in the best way possible. Overall delivery is actually super quick.