Professionals Liquid Metal Kit for Oxidised Metal Walls

Training & Installation Guide

You can view the installation guide for each of the products that you have by clicking on the images below. The products that you have will depend on the selection you made when you ordered the kit. The process varies between products, so make sure you check what you have before you start (see checklist).

And thank you for purchasing this kit, we’re a small business and every order makes a big difference. If you do have 5 minutes to share your feedback with us or leave a review, we’d be truly grateful. And if you have any questions at all, don’t hesitate to get in touch.

Getting Started

• Introduction to Kits
• Preparing Surfaces

1. Prime

Absorbent Substrates

• Apply Primer 100 & Fibreglass Mesh

Non-Absorbent Substrates

• Apply Primer TAC & Fibreglass Mesh

2. Apply Base Coats

MicroDur Base

• Apply 1st Coat MicroDur Base
  No Colour
• Apply 2nd Coat MicroDur Base
  With Colour

3. Apply Top Coats

MicroMetal, Activator & Sealer Oxhider

• Apply MicroMetal
• Apply Activator
• Apply Sealer Oxhider