Professionals Liquid Metal Kit for Floors

Training & Installation Guide

You can view the installation guide for each of the products that you have by clicking on the images below. The products that you have will depend on the selection you made when you ordered the kit. The process varies between products, so make sure you check what you have before you start (see checklist).

And thank you for purchasing this kit, we’re a small business and every order makes a big difference. If you do have 5 minutes to share your feedback with us or leave a review, we’d be truly grateful. And if you have any questions at all, don’t hesitate to get in touch.

Getting Started

• Introduction to Kits
• Preparing Surfaces

1. Prime

Absorbent Substrates

• Apply Primer 100 & Fibreglass Mesh

Non-Absorbent Substrates

• Apply Primer TAC & Fibreglass Mesh

High Performance Primer

• Apply ImpriPox, Fibreglass Mesh & Quartz Sand
• Apply Primer 100

2. Apply Base Coats

MicroDur Base Plus

• Mix MicroDur Base with MicroDur Plus Comp A + B & Apply

3. Apply Top Coats

MicroMetal, Activator, Oxhider Sealer

• Apply MicroMetal with MicroDur Plus Comp A + Comp B
• Apply Activator
• Apply Sealer Oxhider

4. Seal

Water Based for MicroDur Plus

• No HydroPrimer
• Apply 1st Coat AquaMax Pro Floors
• Apply 2nd Coat AquaMax Pro Floors

Solvent Based for MicroDur Plus

• No HydroPrimer
• Apply 1st Coat MaxiPur
• Apply 2nd Coat MaxiPur