DIY Microcement Kit for Outdoor Surfaces

Training & Installation Guide

You can view the installation guide for each of the products that you have by clicking on the images below. The products that you have will depend on the selection you made when you ordered the kit. The process varies between products, so make sure you check what you have before you start (see checklist).

And thank you for purchasing this kit, we’re a small business and every order makes a big difference. If you do have 5 minutes to share your feedback with us or leave a review, we’d be truly grateful. And if you have any questions at all, don’t hesitate to get in touch.

Getting Started

• Introduction to Kits
• Preparing Surfaces

1. Prime

Standard Primer

• Apply Primer 100 & Fibreglass Mesh

Primer TAC

• Apply Primer TAC & Fibreglass Mesh

High Performance Primer

• Apply ImpriPox, Fibreglass Mesh & Quartz Sand
• Apply Primer 100

2. Apply Base Coats

Microne Base

• Apply 1st Coat Microne Base
  No Colour
• Apply 2nd Coat Microne Base
  With Colour

Microne Base Plus

• Apply 1st Coat Microne Base No Colour
• Apply 2nd Coat Microne Base With Colour

3. Apply Top Coats

Continuous/Stucco Effect

• Apply 1st Coat Microne Medium With Colour
• Apply 2nd Coat Microne Medium With Colour

Coarse Effect

• Apply only 1 Coat Microne Coarse
  With Colour

Microne Medium or Coarse Plus

• Apply 1st & 2nd Coat Microne Medium Plus With Colour
• Apply Only 1 Coat Microne Coarse Plus With Colour

4. Seal

Water Based

• Apply 1st Coat AquaMax Pro Floors
• Apply 2nd Coat AquaMax Pro Floors