Unlike our other meshes, the fibreglass mesh in this kit is uncoated, so that when the ImpriPox is poured over it, it penetrates into the fibres making an incredibly strong fibreglass base layer for your microcement.
ImpriPox is a 2 part epoxy primer that will bond the Fibreglass Mesh to your substrate adding strength to the substrate and creating a strong, impenetrable base for your microcement.
Because it’s uncoated, it isn’t as tidy to work with as the standard mesh to work with. You’ll definitely need some fabric scissors to cut it and a squeegee trowel on a pole to apply the ImpriPox over it.
IMPORTANT: This mesh can only be used with epoxy primer. If you microcement directly onto it, it will get broken down.
