• Apply to a wide range of surfaces to achieve a continuous, decorative finish
• Will not crack, expand or contract unless forced
• Ultra strong microcement medium grain coat for high traffic floors
• Single component microcement, add 10kg MicroLevel Medium to 2.3l of water
• Pigments can be added to the mix to achieve a wide range of colours
• Use as a finishing coat for microcement floors
• Apply 2 x 1mm coats with a trowel, allow to dry and sand between coats
• Leave to dry between coats
• Allow to dry before applying sealer
• Excellent adhesion to MicroDur Base as well as several porous and non porous surfaces
• Until sealed, microcement is very porous & will mark easily, take care not to allow it to come into contact with water at any stage during application as it will stain
• Drying times & processes vary by substrate – see Step by Step for details
Working Time
3 Hours
Stucco Effect
Low
Compressive Strength
48 MPa
Consumption
1kg per m2
Weight | 20 kg |
---|---|
Step By Step | https://relentlessinteriors.com/wp-content/uploads/2019/09/Step-by-step_EN-1.pdf |