The natural minerals in the MicroDur products create a natural, organic, cloudy look that is second to none. Combined with Cemher’s incredibly new “Plus” additives, you can acheive the classic microcement look without compromising on performance.
MicroDur Plus is made up of 2 hardeners that are added to MicroDur to make it instantly waterproof, heat resistant and significantly stronger, with absolutely no compromise to the appearance.
For superior quality installations with assured longevity, it really is worth giving MicroDur Plus a go.
• Apply to a wide range of surfaces to achieve a continuous, decorative finish
• Will not crack, expand or contract unless forced
• Strong, cost effective microcement base coat
• Single component microcement, add 10kg MicroDur Base to 3l water
• Pigments can be added to the mix to achieve a wide range of colours
• Use as base coat for all Cemher microcements
• Apply 2 x 1mm coats with a trowel, allow to dry and sand between coats
• Leave to dry before applying Microcement Medium (for floors) or Fine (for walls)
• Allow to dry before applying sealer
• Excellent adhesion to porous & non-porous substrates
• It is essential that all surfaces are primed prior to application
• Porous surfaces include: Sand & Cement Screeds, Anhydrite screeds, Self-Levelling Screed, Timber Composites, Plaster, Plaster Boards, Painted Walls
• Non-porous substrates include: Tiles, Marble, Metal, Terrazzo, Sealed Surfaces
• Until sealed, microcement is very porous & will mark easily, take care not to allow it to come into contact with water at any stage during application as it will stain
• Drying times & processes vary by substrate – see Step by Step for details
