Applying MicroDur Medium Plus with Terrazzo

Follow the directions below to apply the MicroDur Medium with Terrazzo.

The standard consumption for MicroDur Medium with Terrazzo is 10kg for 10m2, one coat.  Expected drying time for MicroDur Medium is 24 hour and there is no limit on how long you can leave it between coats.  The pot life of MicroDur is 2 hours, so it’s best to mix it in batches.

For each 10kg batch, measure 3.6Kg MicroDur Regular Plus Comp A + 450g MicroDur Regular Plus Comp B using a measuring jug.

Mix the A + B components into a mixing bucket, then slowly add the MicroDur Medium, mixing as you go to avoid lumps forming in the mix.

You will need a microcement mixer and a flexible trowel.

Mixing the MicroDur Medium Plus with Terrazzo Flakes

You will need 20kg of MicroDur Medium with Terrazzo to complete 1 coat over 10m2.

For each 10kg batch, measure 3.6Kg MicroDur Regular Plus Comp A + 450g MicroDur Regular Plus Comp B using a measuring jug.

Mix the A + B components into a mixing bucket, then slowly add the MicroDur Medium, mixing as you go to avoid lumps forming in the mix.

Then add 1kg Terrazzo Flakes to 10kg MicroDur Medium & mix gently on a slow speed.  Take care not to mix too aggressively as this could cause theTerrazzo to break down.

Applying the MicroDur Medium Plus with Terrazzo

Use a Microcement Trowel and hold hold it quite flat to the surface. Don’t put as much pressure on as you did with the base coats to avoid crushing the flakes.

Gently spread the terrazzo across the area so that you have full coverage.

Leave to Dry

Leave the Microcement to dry.  This should take around 24 hours.  Drying times do vary depending on temperature and ventilation.